COMPLETE FRONT SUSPENSION ASSEMBLY – Remove & Install or Remove & Replace – Right – [DOES NOT include disassemble or alignment.]
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Left or Right – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel.
Randall F. gave our service a 5 star review on 3/29/2023
Service Transmission replace filter where applicable check for proper operation and leaks
Flush out old coolant and replace with required coolant type and amount.
Clean the master cylinder cap area and remove the old fluid from the reservoir. Fill with fresh fluid and flush with power brake flush machine by pressurizing brake master cylinder and vacuuming old fluid out of each brake bleeder until the fluid is clean
Rick S. gave our service a 5 star review on 10/23/2022
Diagnose air conditioning system not cooling – Including complete leak test
Service air conditioner. Check condition of all belts and lines. Evacuate and recharge with reclaimed R-134. Test system performance.
Infuse Dye
SPARK PLUGS – Remove & Replace – 3.8L Eng Both Sides.
Service Transmission replace filter where applicable check for proper operation and leaks
Flush out old coolant and replace with required coolant type and amount.
Clean the master cylinder cap area and remove the old fluid from the reservoir. Fill with fresh fluid and flush with power brake flush machine by pressurizing brake master cylinder and vacuuming old fluid out of each brake bleeder until the fluid is clean
Road test for power steering operation. Inspect system for leaks. Flush power steering lines, pump, rack and pinion, and or gear box. Install new power steering fluid. Install power steering additive to revitalize seals and . Road test vehicle.
BALL JOINT – Remove & Replace – Lower,Both – [Includes: R&I Control Arm. DOES NOT include alignment.]
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel.
Joyce F. gave our service a 5 star review on 7/10/2022
STEERING GEAR (COMPLETE) – Remove & Replace – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed.]
(Combination) – TIE ROD &/OR END – Replace Each
(Combination) – TIE ROD &/OR END – Replace Each
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel.
Colin M. gave our service a 5 star review on 11/22/2021